Solaris new disks from SAN

This commands help you to force configuration of new disks.
cfgadm -o force_update -c configure c3

Then you can run devfsadm or drvconfig
and later format and newfs.


Before

# cfgadm -al 
Ap_Id                          Type         Receptacle   Occupant     Condition
c0                             scsi-bus     connected    configured   unknown
c0::dsk/c0t0d0                 CD-ROM       connected    configured   unknown
c1                             fc-private   connected    configured   unknown
c1::500000e010c3b8e1           disk         connected    configured   unknown
c1::500000e010c466c1           disk         connected    configured   unknown
c1::500000e010c47e51           disk         connected    configured   unknown
c1::500000e010c47f31           disk         connected    configured   unknown
c1::500000e010c49711           disk         connected    configured   unknown
c1::500000e010c49b41           disk         connected    configured   unknown
c1::50800200001f8811           ESI          connected    configured   unknown
c2                             fc-fabric    connected    configured   unknown
c2::50060e8000c41da3           disk         connected    configured   unknown
c2::50060e8000c41da7           disk         connected    configured   unknown
c2::50060e8004f35919           disk         connected    unconfigured unknown
c3                             fc-fabric    connected    configured   unknown
c3::50060e8000c41da2           disk         connected    configured   unknown
c3::50060e8000c41da6           disk         connected    configured   unknown
c3::50060e8004f35909           disk         connected    unconfigured unknown
pcisch0:hpc1_slot0             fibre/hp     connected    configured   ok
pcisch0:hpc1_slot1             unknown      empty        unconfigured unknown
pcisch0:hpc1_slot2             unknown      empty        unconfigured unknown
pcisch0:hpc1_slot3             unknown      empty        unconfigured unknown
pcisch2:hpc2_slot4             unknown      empty        unconfigured unknown
pcisch2:hpc2_slot5             unknown      empty        unconfigured unknown
pcisch2:hpc2_slot6             unknown      empty        unconfigured unknown
pcisch3:hpc0_slot7             fibre/hp     connected    configured   ok
pcisch3:hpc0_slot8             pci-pci/hp   connected    configured   ok

You can see that c3::50060e8004f35909 c2::50060e8004f35919 not configured.

Run cfgadm
cfgadm -o force_update -c configure c2

Now you can see c2::50060e8004f35919 configured. Do this also for c3

# cfgadm -al
Ap_Id                          Type         Receptacle   Occupant     Condition
c0                             scsi-bus     connected    configured   unknown
c0::dsk/c0t0d0                 CD-ROM       connected    configured   unknown
c1                             fc-private   connected    configured   unknown
c1::500000e010c3b8e1           disk         connected    configured   unknown
c1::500000e010c466c1           disk         connected    configured   unknown
c1::500000e010c47e51           disk         connected    configured   unknown
c1::500000e010c47f31           disk         connected    configured   unknown
c1::500000e010c49711           disk         connected    configured   unknown
c1::500000e010c49b41           disk         connected    configured   unknown
c1::50800200001f8811           ESI          connected    configured   unknown
c2                             fc-fabric    connected    configured   unknown
c2::50060e8000c41da3           disk         connected    configured   unknown
c2::50060e8000c41da7           disk         connected    configured   unknown
c2::50060e8004f35919           disk         connected    configured   unknown
c3                             fc-fabric    connected    configured   unknown
c3::50060e8000c41da2           disk         connected    configured   unknown
c3::50060e8000c41da6           disk         connected    configured   unknown
c3::50060e8004f35909           disk         connected    unconfigured unknown
pcisch0:hpc1_slot0             fibre/hp     connected    configured   ok
pcisch0:hpc1_slot1             unknown      empty        unconfigured unknown
pcisch0:hpc1_slot2             unknown      empty        unconfigured unknown
pcisch0:hpc1_slot3             unknown      empty        unconfigured unknown
pcisch2:hpc2_slot4             unknown      empty        unconfigured unknown
pcisch2:hpc2_slot5             unknown      empty        unconfigured unknown
pcisch2:hpc2_slot6             unknown      empty        unconfigured unknown
pcisch3:hpc0_slot7             fibre/hp     connected    configured   ok
pcisch3:hpc0_slot8             pci-pci/hp   connected    configured   ok

After that I can see disk in format menu. Change disk layout.
6. c4t60060E8004F359000000F35900000D1Ad0
/scsi_vhci/ssd@g60060e8004f359000000f35900000d1a

Create file system
newfs /dev/rdsk/c4t60060E8004F359000000F35900000D1Ad0s0