Server Sun Fire X4100 M2
Storage SUN StorEdge 3510
sccli> show disks
h Id Size Speed LD Status IDs Rev
----------------------------------------------------------------------------
2(3) 6 279.40GB 200MB NONE FRMT SEAGATE ST330055FSUN300G 0691
S/N 14T0VB9R
WWNN 2000001862817790
2(3) 7 279.40GB 200MB NONE FRMT SEAGATE ST330055FSUN300G 0691
S/N 14T0VE2D
WWNN 2000001862817673
2(3) 8 279.40GB 200MB NONE FRMT SEAGATE ST330055FSUN300G 0691
S/N 10T0PZNQ
WWNN 2000001862811CF3
2(3) 9 279.40GB 200MB NONE FRMT SEAGATE ST330055FSUN300G 0691
S/N 14T0PQYD
WWNN 2000001862817416
2(3) 10 279.40GB 200MB NONE FRMT SEAGATE ST330055FSUN300G 0691
S/N 10T0NHYW
WWNN 2000001862811D30
2(3) 11 279.40GB 200MB GLOBAL STAND-BY SEAGATE ST330055FSUN300G 0691
S/N 14T0QYAG
WWNN 2000001862817F59
I used disk 6 to 10 create logical drive RAID5 configuration.
sccli> create logical-drive RAID5 2.6-10
sccli: created logical drive 72BE98D8
now status
sccli> show disks
Ch Id Size Speed LD Status IDs Rev
----------------------------------------------------------------------------
2(3) 6 279.40GB 200MB ld0 ONLINE SEAGATE ST330055FSUN300G 0691
S/N 14T0VB9R
WWNN 2000001862817790
2(3) 7 279.40GB 200MB ld0 ONLINE SEAGATE ST330055FSUN300G 0691
S/N 14T0VE2D
WWNN 2000001862817673
2(3) 8 279.40GB 200MB ld0 ONLINE SEAGATE ST330055FSUN300G 0691
S/N 10T0PZNQ
WWNN 2000001862811CF3
2(3) 9 279.40GB 200MB ld0 ONLINE SEAGATE ST330055FSUN300G 0691
S/N 14T0PQYD
WWNN 2000001862817416
2(3) 10 279.40GB 200MB ld0 ONLINE SEAGATE ST330055FSUN300G 0691
S/N 10T0NHYW
WWNN 2000001862811D30
2(3) 11 279.40GB 200MB GLOBAL STAND-BY SEAGATE ST330055FSUN300G 0691
S/N 14T0QYAG
WWNN 2000001862817F59
Check logical drive now
sccli> show ld
LD LD-ID Size Assigned Type Disks Spare Failed Status
------------------------------------------------------------------------
ld0 72BE98D8 1.09TB Primary RAID5 5 1 0 Good I
Write-Policy Default StripeSize 128KB
Create logical volume
sccli> create lv ld0 primary
sccli: created logical volume 391D4ADF
sccli> show lv
LV LV-ID Size Assigned Write-Policy LDs
-----------------------------------------------------------------
lv0 391D4ADF 1.09TB Primary Default 1 ld0
Create map
sccli> show channels
Ch Type Media Speed Width PID / SID
--------------------------------------------
0 Host FC(L) 2G Serial 40 / N/A
1 Host FC(L) N/A Serial N/A / 42
2 DRV+RCC FC(L) 2G Serial 14 / 15
3 DRV+RCC FC(L) 2G Serial 14 / 15
4 Host FC(L) 2G Serial 44 / N/A
5 Host FC(L) N/A Serial N/A / 46
6 Host LAN N/A Serial N/A / N/A
3510 use channel 0 and pid 40 and channel 4 pid 44 here.
sccli> map lv0 0.40.0
sccli: mapping lv0-00 to 0.40.0
sccli> show map
Ch Tgt LUN ld/lv ID-Partition Assigned Filter Map
---------------------------------------------------------------------
0 40 0 lv0 391D4ADF-00 Primary
I recommend disabling mpxio if you are facing problems.
sccli> map lv0 4.44.0
sccli: mapping lv0-00 to 4.44.0
sccli> show map
Ch Tgt LUN ld/lv ID-Partition Assigned Filter Map
---------------------------------------------------------------------
0 40 0 lv0 391D4ADF-00 Primary
4 44 0 lv0 391D4ADF-00 Primary
Be sure devices are connected now. If you have problem in this step and for the rest of them, I highly recommend check configuration of 3510 .
#luxadm -e port
/devices/pci@0,0/pci10de,5d@e/pci1077,143@0/fp@0,0:devctl CONNECTED
/devices/pci@0,0/pci10de,5d@e/pci1077,143@0,1/fp@0,0:devctl NOT CONNECTED
/devices/pci@0,0/pci10de,5d@d/pci1077,143@0/fp@0,0:devctl CONNECTED
/devices/pci@0,0/pci10de,5d@d/pci1077,143@0,1/fp@0,0:devctl NOT CONNECTED
And see that disk devices are ok.
#luxadm -e dump_map /devices/pci@0,0/pci10de,5d@e/pci1077,143@0/fp@0,0:devctl
Pos Port_ID Hard_Addr Port WWN Node WWN Type
0 a7 0 216000c0ff8b5125 206000c0ff0b5125 0x0 (Disk device)
1 1 0 2100001b3202e7c4 2000001b3202e7c4 0x1f (Unknown Type,Host Bus Adapter)
and
#luxadm -e dump_map /devices/pci@0,0/pci10de,5d@d/pci1077,143@0/fp@0,0:devctl
Pos Port_ID Hard_Addr Port WWN Node WWN Type
0 a5 0 226000c0ffab5125 206000c0ff0b5125 0x0 (Disk device)
1 1 0 2100001b3202dc8f 2000001b3202dc8f 0x1f (Unknown Type,Host Bus Adapter)
Now check that they are connected and configured, if not configure them
#cfgadm -al
Ap_Id Type Receptacle Occupant Condition
c3 scsi-bus connected configured unknown
c3::dsk/c3t2d0 disk connected configured unknown
c4 fc-private connected configured unknown
c4::226000c0ffab5125 disk connected configured unusable
c5 fc-private connected configured unknown
c5::216000c0ff8b5125 disk connected configured unusable
c6 fc connected unconfigured unknown
c7 fc connected unconfigured unknown
and run devfsadm command to build device tree. and see them with format command.
Posts
No comments:
Post a Comment